Create experiences that leave you in awe, for these will be the highlights of your life. ~Ryan Blair

Wednesday, November 5, 2014

Cosmo Convertible Handbag

Have you ever made your own handbags? Or wished you could find patterns that are beautiful and provide some challenge?

Then, you really should check out this post and see what inspired me to stitch up this unique project from: StudioKatDesigns.

My first bag (Lollapalooza) was made in 2010; and now I am back to share with you, my second bag. It is the Cosmo Convertible - and is three styles in one.


The Cosmo Convertible (on left) --- Lollapalozza (on right)

This is something that gets my interest; as I enjoy combining techniques, whenever possible. So, why not see what else I decided to add to make this new project exciting... and see how it came together.


FABRICS:
YELLOW: A light color works best for the interior of the bag as the lining fabric.
BLUE: A piece was embellished with "stupendous stitching"; and a piece was left plain for the exterior of the bag. (Appropriate pieces were cut from the embellished fabric.)
FLORAL: A decorative fabric for the exterior and handles.

Originally, it was the embellished blue that was to go on the sides; and the floral to be used for the inset pieces. However, that was changed at the last minute; and at first, was not sure if I had made the right decision. But, the combo grew on me; and by the time it was done, I loved the change.

MY HANDBAG FABRICS
Blues and Floral - exterior; Yellow - interior
Blue embellished with "Stupendous Stitching" a Craftsy class

HARDWARE:
ANTIQUE BRASS FINISH

At the time that I made this purchase, I was not certain what fabric colors I would use; so had to decide whether to go with a polished shiny nickel or a classic antique brass finish. Selecting the brass, would give my bag a more rustic look as the pieces were in a variety of brass tones. 

Also, I was trying to cut down on shipping costs; (don't we all) and found this closer-to-home shop that would fulfill this wish.  So if you need any zippers or hardware, check this one out.

MY HANDBAG HARDWARE
Hardware in antique brass from Emmalinebags

PATTERN PIECES:
EMBELLISHMENT

Once the decision was made on which pieces would use the embellished fabric, it was done. To give the edge between the blue and floral fabric a better separation, mock piping was added. 

Then... after a hard look at these results, made one more change. I found the back piece too plain; so I redid the top portion, (above the zippered pocket) in the embellished fabric. I was not going to redo the pocket, as I wanted the back side to be different from the front of the bag.

FRONT AND BACK PIECES (Before)

FRONT PATTERN PIECE
Center: embellished with fancy stitching and mock piping

BACK PATTERN PIECE (After)
Top: embellished with fancy stitching and mock piping

RESULTS:
HANDBAG

It is pretty safe to say, that I generally give my own twist to original patterns, and this one is no exception. Therefore, to see the original pattern, please visit the website. 

Several variations in fabric are made; and this was the one that inspired me to purchase this pattern, written about here: blog post.


FRONT VIEW OF BAG

BACK VIEW OF BAG

EXTRAS:
EZ eReader and AeroPac

Having the desire to make a cover for my Kindle; it was the perfect match for this bag. Using the leftover piece from the embellished fabric, I had just enough to make this cover. 

Both these are FREE patterns. 

MY COSMO SET


Time is ticking by... perhaps, in the next few moments, you'll find that next project that inspires you to take action. Happy stitching!!


Embellish your life.... with a creative project, soon!




Wednesday, October 29, 2014

Getting Ready for Halloween

Throughout the years, 
we share in this celebration in many different ways. 
- - - - - - - - - - - - - - - - - - - - -

Some go all out and decorate, 
Make costumes, 
Buy candy, 
Go to parties, 
Love seeing those little people dressed up, 
And responding to the words: "Trick or Treat".

Or perhaps:
Quilting may be at the top of your list!

- - - - - - - - - - - - - - - - - - - - -

When it comes to quilting, we like to try all manner of projects; and Halloween projects are really fun to make with those delightfully bright and colorful orange fabrics, that reflect this season. And when does a quilter not LOVE collecting seasonal fabrics! These fall colors are so inspiring.


My first and only Halloween quilt is this wall-hanging:

Since seasonal quilting fabrics are so fun to work with, I really wanted to make a quilt with these oranges from my stash, even though I had not purchased any Halloween fabrics.




The quilt is from this book: "Easy Does It For Autumn" by Art To Heart.

To see more on this project, visit this link: Halloween Candy Quilt, made in 2010.







Two things that I did differently were: 
(1) Not adding the fancy buttons because I didn't want to spend the money; 
(2) Binding the quilt rather than sewing right sides together and turning it. 

I enjoy doing the binding stage; and liked this look much better. It was a fun and easy project!





Shown: Quilt in progress. 

Perhaps, one day I'll still add some fancy buttons. And get to hang it!

View the finished project here.


The other project for Halloween is a sewing project:

One year, I made my grandchildren these delightful bags for when they went trick-or-treating. They were really fun to make. This time I went out and purchased these Halloween fabrics to make them extra special.

TREAT BAGS

This FREE project I found online; and can be downloaded from: fishsticksdesigns/blog. 

Now, this reminds me... that I still haven't used those little boys patterns that I purchased from her site. Maybe it is time to start my 2015 Hope-to-Make list before I forget again.  ;)


Have a safe and happy day!!



Wednesday, October 22, 2014

How-to Chain Piece Odd-Numbered Block Sets

Is chain-piecing your favorite way to join blocks?
For me this is true.

CHAIN-PIECING STRIPS
PROS
  • It saves time; 
  • and the bobbin thread lasts longer when not having to cut thread at the end of each piece stitched. (And that's a good thing!)
CONS
  • If you are sewing up block sections with odd-numbered pieces, there seems to always be one block left. And when is it best to add it to the other pieced parts?
  • If you get confused and sew blocks together that aren't supposed to be joined, time is lost in ripping out those seams. 
  • It can be difficult to remember which blocks come next.... and your seam ripper is used more than you wish. (Can't have the seam ripper get too much time in!)


IN COMES A BETTER METHOD .... 
To Organize the Process With Less Frustration!

This tutorial uses a block section containing 81 squares; and will be sewn together in groups of three. No one block will be left orphaned in the chain-piecing process. Have fun!!


PREPARATION OF BLOCKS
STEP 1:
Set up a design wall or portable board, to allow you to arrange the blocks correctly; and use this method more effectively. (See How-to Make a Grid Layout for use on your design wall.)


STEP 2:
Place your fabric squares on the design wall (fabric grid is optional) in a pleasing arrangement. This can take some time; however, try to enjoy the process. After this is done, you are ready to label the appropriate rows. This will keep blocks correctly placed, as the columns come together.

NOTE: At the time the photos (those included in this post) were taken, I was using a flannelette fabric draped over a cardboard box. And realized that a grid would allow for even spacing as one planned out the design.


STEP 3:
For your labels, use either purchased stickers or pieces of masking tape. Use a marker or pen to write numbers on each piece. You will need 27 pieces: (3 sets of numbers = 1 to 9)


STEP 4:
Once labels are prepared, add them to the squares in ROWS 1, 4, and 7 as shown in diagram below. The numbered blocks will allow easy placement back on the design wall, throughout the process.




SEWING THE BLOCKS TOGETHER
STEP 5:
Now you are ready to begin with the chain-piecing process. Each group of three rows will be done the same. Pressing is very important; it begins in Step 5-C. The photos below show the completed process of each grouping.

Let's begin to construct these blocks to form the following groupings. 


(5A.)  
Chain-piecing squares from ROW 1 and ROW 2. Then adding squares from ROW 3.

Keep the stickers on the blocks as you sew. You will be stitching the blocks together to form nine columns of three blocks each.




(1.)
Take the top block in COLUMN 1 (labeled 1) and the block directly below it from ROW 2. Sew these two blocks together. Next take the top block in COLUMN 2 (labeled 2) and the block directly below it from ROW 2, and sew these together. Then continue chain-piecing blocks from COLUMNS 3-9 until all are done.

NOTE: You may separate the chain-pieced blocks at any point; once you have at least one or two pieced blocks done. Then pin them back on the design wall to keep them correctly positioned. With the numbered stickers on the top blocks, you'll always know which direction to place them back on the fabric grid. This allows you to see how the pieced blocks look as they are assembled.


(2.)
Once ROWS 1-2 are done; add blocks from ROW 3. Start by taking down COLUMN 1 (Pieced ROW 1-2 blocks) and add the ROW 3 block; continue as before by going across the columns until you have three blocks sewn together from ROWS 1-3.

NOTE: Pin finished columns back onto the fabric grid. To keep the chain-piecing going; separate previously stitched blocks and add them to the design wall before you get to the end of the row. Or take from the next section if you wish to completely finish a row. Then place them in the appropriate place as you continue.


(3.)
Now that the section for ROWS 1-2-3 is complete; repeat the same steps to complete ROWS 4-5-6; and then ROWS 7-8-9. Pin finished columns back onto the design wall.

You will now have three sections containing three completed rows as shown in the photo below.

ROWS 1-2-3; ROWS 4-5-6; ROWS 7-8-9
COLUMNS SEPARATED INTO THREE SECTIONS


(5B.)
Chain-piecing column groupings into completed COLUMNS. 

(1.)
Beginning with COLUMN 1; sew together blocks from ROWS 1-2-3 and ROWS 4-5-6. They are labeled with a (1). Then sew together ROWS 1-2-3 and ROWS 4-5-6 from COLUMN 2 which are labeled (2). Continue across the columns until all nine are completed. Pin these back onto the design wall as you separate them from the chain-piecing process.

NOTE: Now that the blocks are put into columns and hung on the design wall, you can see what your finished piece with look like. If you wish to make any changes in placement you should do it now, before the columns are sewn together. 




ROWS 1-2-3-4-5-6; ROWS 7-8-9
JOINING COLUMNS: ROWS 1-2-3 TO ROWS 4-5-6

(2.)
Now you should have ROWS 1-6 joined into columns. To complete this stage, repeat the process as before by adding ROWS 1-6 to ROWS 7-8-9. The columns are now ready to join together.


COLUMNS 1-2-3-4-5-6-7-8-9
INDIVIDUAL COLUMNS MADE FROM ROWS 1 TO 9


(5C.)
Pressing seams; and chain-piecing column groupings into sets of three. 

(1.)
It is now; that we should press our seams before they are joined to other columns. You may press in an earlier stage if you wish; however, you really don't need to turn on the iron until this step. Also if you have a portable design wall you will not have needed to get up from the sewing machine, until now. (Good time for a stretch!)

Pressing the seams: press all even-numbered columns one direction; and press all odd-numbered columns in the opposite direction. This will ensure that the seams are going in opposite directions when nesting them before stitching, as you join the columns.


(2.)
To begin sewing together the columns; start with COLUMNS 1-2; then do COLUMNS 4-5; and lastly COLUMNS 7-8. Once these are stitched; separate them from each other. And add the missing column in each grouping. Joining C3 to C1-2; C6 to C4-5; and C9 to C7-8.

Match up seams; (seams should have been pressing in opposite directions) and then sew the two columns together. Separate the chain-pieced columns, so they are ready to add the third column to each of those columns already stitched. At any time, you can detach them from the chain-piecing process and pin them back on the design wall.

It will not matter in which direction you press these seams, at this stage. When pressing seams, it is usually easier when the section is smaller. So if you wish, sew together the three sections; then press. Or press once all nine columns are joined.




COLUMNS 1-2-3; 4-5-6; and 7-8-9
COLUMNS JOINED INTO THREE SECTIONS

(5D.)
Block Set is complete. How will you use it?    

(1.)
If you haven't pressed the seams as you assembled the columns, do that now. Your 81-block section is now complete; and can be used in a variety of projects, as desired.


(2.)
After making five of these block sets, my sixth ended up coming together the fastest and without placement error. Here's what I discovered:
  • Chain-piecing works great; but how many times does one still have to stop and start again when not having a sewing order in place?  (Labeling the rows really works!)
  • Once blocks are sewn; they are harder to match with blocks from unsewn blocks still on the design wall.
  • Thinking one can remember the correct order; and it actually happening that way, generally brings the seam ripper to the rescue to fix any errors. 
  • When similar colors are used on both top and bottom of a column, which way was up?
  • Putting the blocks together in stages, kept the chain-piecing process going smoothly.
  • The numbered squares were easy to keep in order; and placement back on the design wall was effortless.
  • An assembly method for joining blocks, always provides a good rhythm to the quilting process. 
  • Having a portable design wall, eliminated the need to get up while sewing the blocks, until pressing was needed. (Mine was a cardboard box and a folded sheet of flannelette.)

Turning those scraps into squares, provides new opportunities for creating fun blocks; resulting in more unique quilted projects.

Here is my sixth (final) color theme ready to be turned into something new. I will share more on these block sets, in a later post.


COMPLETED SCRAPPY BLOCK
81-BLOCK SECTION COMPLETED

If you found this tutorial useful, please share your comments below. I'd love to hear from you.

When square is beautiful... still works for quilters!!